|
|
FlashlightsPages 1 2 3 4 Light Cannon 100 The new High Intensity Discharge (HID) illumination technology allows this dive light to emit three times more light per watt of battery power than standard xenon or halogen lamps. It shines farther and produces a beam as white as the Sun and you can use it in or out of water. Beam adapters are included for video lighting. The miniature HID lamp gives a giant leap in brightness with no increase in battery usage and gives the beam the same color as sunlight. It measures 8" x 3" and is made with black non-corroding ABS and polycarbonate construction with a rubber lens guard. Video filters included for 30-40 degree wide angle lighting. It has a locking power switch. Pistol or lantern style handles and two dovetail slots to accomodate other mounting accessories. Waterproof to 500 feet. Up to 4 hour burn time. Requires 8 "C" alkaline or NiCad batteries. Rubber lined nylon wrist lanyard with rugged adjustment lock.
Up to 1000 hour lamp life. Improved spectral quality allows light to travel farther through water. Powered by disposable alkaline batteries or rechargeable UK NiCad Upgrade kit, Also uses individual nicad or NiMH C-size batteries. Polarized battery compartment reduces battery leakage. Nonbreakable locking switch. Pistol or lantern grip and rubber sleeve lanyard included. Tough, non-corroding ABS and polycarbonate plastic construction. Waterproof to 500 feet.
Vizion eLE Headlamp This headlamp is built off of a cylinder type construction with a semi-rigid two hooped mounting system the Vizion? 3AAA eLED? is designed to rotate on its own axis. Self contained the headlamp is roughly the size of the plastic capsule a 35mm film comes in. It has a waterproof rating of 10 meters, two power options, three selectable beam patterns, a high power LED (Approx. ? watt) and an output of approximately 29 lumens. With a large power button and adjustment knobs, the Vizion? can be turned on and off and cycle through beam patterns and colors with ease- even while wearing gloves.
The Vizion? 3AAA eLED? Headlamp will also have the following proprietary design and use applications:
Proprietary Battery warming / Heat Recovery System - Warmer batteries equals more power! Designed so the heat from the LED (LED runs cooler) goes into the batteries ( huge asset in cold weather climates), providing approximately 10% more run time and output from the cooler LED. The key here is to control the warming point (LED?s loose efficiency as they get too hot) so efficiency isn?t lost. This is done with a proprietary battery heat sink system that works in conjunction with the surface area of the whole unit to make the unit run cooler. UK?s Proprietary Advanced Compound Path Optics (CPO) Most multi-beam LED systems use multiple bulbs and/or external filters. UK?s Compound Path Optics (CPO) system is self-contained. Internal lenses rotate over the primary bulb system offering three different beam pattern / color options; Spot, Wide and Red Wide using a rotating a knob system. When the options are rotated in front of the inner optics, the beam widens, turns red, etc. Removable LED Lamp Module For Use As Camp Light. The self contained LED lamp module, constructed of high impact ABS, LEXAN?, polyurethane rubber, and plated copper for heat efficiency, can be removed from head mount for use as camp light- still offering the user three different beam pattern options and color changes. With a suggested retail of about $31.95 the Vizion? 3AAA eLED? Headlamp will be the first in a new series of headlamps which represent a major advancement in headlamp technology.
SPECS: Size: L 2.90 in / 7.37 cm; H 1.47 in / 3.73 cm; D 1.82 in / 4.63 cm Weight: 3.9 oz / 110 gm (alkaline batteries); 3.5 oz / 99 gm (lithium batteries) Batteries: 3 AAA alkaline, 3 AAA lithium Brightness: 29 lumen / 290 lux Distance Seen: 305 ft / 93 m Burn Time: 150 hours Depth Tested: 33 ft / 10 m
4 AA eLED Z Light Yellow This 2-watt LED light lasts for thousands of hours and maintains constant brightness for over 80% of the battery life. Unlike conventional lights the solid state LED will not break when dropped. As a result, you save real money on the cost of battery and lamp replacements. A twist of the bezel zooms the light between an intense narrow beam and a broad illuminating beam using the unique Projection Optics design. By clicking the switch rapidly one can switch between full power to the LED and less power for extending the burn time. This fully accessorized worklight can be mounted on a hard hat or fire helmet or carried in your pocket or tool box. A necessity for confined space workers, utilities, municipalities, firefighters, safety inspectors, etc. UL and CSA Class I Div 2 rated for use in hazardous locations.
Projection Optics let you zoom with a twist of the bezel from a wide beam to an intense spot. Single high-intensity 2-watt LED lasts for thousands of hours and will not break when dropped. Unique eLED? circuitry maintains constant brighness for 80% of alkaline battery life. Rubber sheath molded over bezel to reduce glare and improve impact resistance (passes 6 ft drop to concrete test). Push-button thumb switch switches light between ON/OFF and high/low intensity with continuous or momentary action. New easy loading drop-in battery compartment for quick reload of batteries. Hydrogen scrubber catalyst, polarized battery contacts and 0-psi vent minimize explosive risk from leaking batteries. Tough, electrically non-conductive, non-corroding ABS and polycarbonate plastic construction. Mounts on all work helmets with accessory mounting clips. Waterproof to 10 meters.
Battery: 4 x Duracell MN1500/PC1500, Energizer E91/EN91 or Rayovac AL-AA/815 1.5 V alkaline AA-cells. Although other types of batteries may work in this light, they have not been rated for use in hazardous locations.
4 AA eLED Z Light Black When you need a high quality flashlight, you need a flashlight made by Underwater Kinetics! The 2-watt LED lasts for thousands of hours and maintains constant brightness for over 80% of the battery life. Unlike conventional lights the solid state LED will not break when dropped. As a result, you save real money on the cost of battery and lamp replacements. A twist of the bezel zooms the light between an intense narrow beam and a broad illuminating beam using the unique Projection Optics design. By clicking the switch rapidly one can switch between full power to the LED and less power for extending the burn time. This fully accessorized worklight can be mounted on a hard hat or fire helmet or carried in your pocket or tool box. A necessity for confined space workers, utilities, municipalities, firefighters, safety inspectors, etc. UL and CSA Class I Div 2 rated for use in hazardous locations.
Projection Optics let you zoom with a twist of the bezel from a wide beam to an intense spot. Single high-intensity 2-watt LED lasts for thousands of hours and will not break when dropped. Unique eLED? circuitry maintains constant brighness for 80% of alkaline battery life. Rubber sheath molded over bezel to reduce glare and improve impact resistance (passes 6 ft drop to concrete test). Push-button thumb switch switches light between ON/OFF and high/low intensity with continuous or momentary action. New easy loading drop-in battery compartment for quick reload of batteries. Hydrogen scrubber catalyst, polarized battery contacts and 0-psi vent minimize explosive risk from leaking batteries. Tough, electrically non-conductive, non-corroding ABS and polycarbonate plastic construction. Mounts on all work helmets with accessory mounting clips. Waterproof to 10 meters.
Battery: 4 x Duracell MN1500/PC1500, Energizer E91/EN91 or Rayovac AL-AA/815 1.5 V alkaline AA-cells. Although other types of batteries may work in this light, they have not been rated for use in hazardous locations.
Unilite 6 Light Black This black flashlight is unique in that the 90? lamp head rotates in any direction to focus light exactly where you need it. Simply lay the 4AA Right Angle down and twist the light head to point at your work. A sturdy unbreakable nylon clip is included so that the 4AA Right Angle Light can be clipped to a coat pocket, safety strap, or belt. Once again twist the head to light up your work. For straight on illumination the right angle section can be removed. For easy access a stainless split ring and snap are included for attachment to clothing loops and button holes. The high impact ABS and polycarbonate case is o-ring sealed and waterproof use in the rain and submerged illumination.A necessity for confined space workers, utilities, municipalities, firefighters, safety inspectors, etc. UL rated for use in hazardous locations.
Features: Head rotates 360? to direct beam in any direction. Split ring and clip included for attachment to coat pocket, belt or strap. Rubber sheath molded over bezel to reduce glare and improve impact resistance. Rubber covered thumb switch allows momentary or continuous duty. Prefocused high intensity xenon lamp. New easy loading drop-in battery compartment for quick reload of batteries. Hydrogen scrubber catalyst, polarized battery contacts and 0-psi vent minimize explosive risk from leaking batteries. Tough, non-corroding ABS and polycarbonate plastic construction. Waterproof to 10 meters.
Battery: 4 x Duracell MN1500/PC1500, Energizer E91/EN91 or Rayovac AL-AA/815 1.5V alkaline AA-cells. Although other types of batteries may work in this light, they have not been rated for use in hazardous locations.
Unilite 6 Light Yellow This yellow flashlight is unique in that the 90? lamp head rotates in any direction to focus light exactly where you need it. Simply lay the 4AA Right Angle down and twist the light head to point at your work. A sturdy unbreakable nylon clip is included so that the 4AA Right Angle Light can be clipped to a coat pocket, safety strap, or belt. Once again twist the head to light up your work. For straight on illumination the right angle section can be removed. For easy access a stainless split ring and snap are included for attachment to clothing loops and button holes. The high impact ABS and polycarbonate case is o-ring sealed and waterproof use in the rain and submerged illumination.A necessity for confined space workers, utilities, municipalities, firefighters, safety inspectors, etc. UL rated for use in hazardous locations.
Features: Head rotates 360? to direct beam in any direction. Split ring and clip included for attachment to coat pocket, belt or strap. Rubber sheath molded over bezel to reduce glare and improve impact resistance. Rubber covered thumb switch allows momentary or continuous duty. Prefocused high intensity xenon lamp. New easy loading drop-in battery compartment for quick reload of batteries. Hydrogen scrubber catalyst, polarized battery contacts and 0-psi vent minimize explosive risk from leaking batteries. Tough, non-corroding ABS and polycarbonate plastic construction. Waterproof to 10 meters.
Battery: 4 x Duracell MN1500/PC1500, Energizer E91/EN91 or Rayovac AL-AA/815 1.5V alkaline AA-cells. Although other types of batteries may work in this light, they have not been rated for use in hazardous locations.
4 AA Xenon Light Black This light is designed to be a fully accessorized worklight can be mounted on a hard hat or fire helmet, carried in a belt pouch or used to direct traffic. A necessity for confined space workers, utilities, municipalities, firefighters, first responders and anyone that needs a dependable high quality work light. The rubber sheath is molded over the bezel to reduce glare and improve impact resistance (passes UL 30 ft drop to concrete test). A push-button thumb switch offers ease of use and the prefocused high intensity spot beam gives excellent lighting conditions. It's now designed with a new easy loading drop-in battery compartment for quick reload of batteries. The Hydrogen scrubber catalyst, polarized battery contacts and 0-psi vent minimize explosive risk from leaking batteries. It's made of tough, non-corroding ABS and polycarbonate plastic construction and is waterproof up to 10 meters.
Battery: 4 x Duracell MN1500/PC1500, Energizer E91/EN91 or Rayovac AL-AA/815 1.5V alkaline AA-cells. Although other types of batteries may work in this light, they have not been rated for use in hazardous locations.
4 AA Xenon Light Yellow This fully accessorized worklight can be mounted on a hard hat or fire helmet, carried in a belt pouch or used to direct traffic. A necessity for confined space workers, utilities, municipalities, firefighters, first responders and anyone that needs a dependable high quality work light. The rubber sheath is molded over the bezel to reduce glare and improve impact resistance (passes UL 30 ft drop to concrete test). A push-button thumb switch offers ease of use and the prefocused high intensity spot beam gives excellent lighting conditions. It's now designed with a new easy loading drop-in battery compartment for quick reload of batteries. The Hydrogen scrubber catalyst, polarized battery contacts and 0-psi vent minimize explosive risk from leaking batteries. It's made of tough, non-corroding ABS and polycarbonate plastic construction and is waterproof up to 10 meters.
Battery: 4 x Duracell MN1500/PC1500, Energizer E91/EN91 or Rayovac AL-AA/815 1.5V alkaline AA-cells. Although other types of batteries may work in this light, they have not been rated for use in hazardous locations.
Mini Q40 X Light Black This light is a Diver's First Choice! The high intensity Mini Q40 is lightweight enough to attach to your mask strap for hands free illumination of gauges and close-up marine life. It outshines many lights three times its size. A Rubber sheath is molded over the bezel to reduce glare and improve impact resistance. The tough non-corroding ABS and polycarbonate plastic construction will hold up to the most extreme diver's explorations. It works well as a photographers spotting light. Fits Sea & Sea, Ultralight and other camera mounting adapters are available. It includes a mask strap and is waterproof up to 500 feet.
Mini Q40 X Light Yellow The high intensity Mini Q40 is lightweight enough to attach to your mask strap for hands free illumination of gauges and close-up marine life. It outshines many lights three times its size. A Rubber sheath is molded over the bezel to reduce glare and improve impact resistance. The tough non-corroding ABS and polycarbonate plastic construction will hold up to the most extreme diver's explorations. It works well as a photographers spotting light. Fits Sea & Sea, Ultralight and other camera mounting adapters are available. It includes a mask strap and is waterproof up to 500 feet.
2 AAA eLED Penlight Black These pen lights have very specific design requirements and are ideal for close-up inspections, nighttime repairs, or navigating in the dark. This penlight is designed for technicians, utility workers, first responders, physicians, paramedics, and other professionals who need a top-quality lighting source. An ultra-lightweight tool that is the brightest in its class, the UK2AAA Penlight S comes with a rubber-covered tail switch and either a high-intensity focused xenon lamp (1.13-watts), or a long-lasting, high-lumen white LED (with a runtime of 20 hours).
One of the most significant innovations of the UK2AAA Penlight S is its unique three-way switch: ?full on/off?, ?momentary on/off?, and ?off?, allowing users to conserve battery life and to generate the right amount of light exactly when they need it. No other product on the market offers this feature.
About the size of a pen and weighing only five ounces, the UK2AAA Penlight S eLED has a rubber sheath molded over by an optically corrected bezel, which reduces glare and focuses the beam. This feature delivers an even circular beam that fully illuminates a work area.
?Individuals who need a penlight know firsthand that the product must produce a sharp beam and be durable and reliable. The UK2AAA Penlight S meets the needs of the most demanding professionals,? said Alan Uke, president of UK.
Made of a non-conductive polycarbonate case, the UK2AAA Penlight S is resistant to grease and many chemicals. Its durable casing makes the product extremely rugged and ideal for a myriad of uses.
The UK2AAA Penlight S is waterproof and is submersible up to ten feet. Two AAA batteries power it.
2 AAA Xenon Penlight This pen light should be called a Power Light! Its non-conductive high impact case allows use around circuitry or electricity. UL Class I Div 2 or CENELEC Eex (ATEX) rated for use in hazardous locations. It has a high intensity xenon filled lamp that is prefocused for an instant narrow beam. The button tip is glow in the dark for easy location in the dark. It has a twist on and off switch for convenience. The electrically non-conductive touch LEXAN plastic construction case has a molded pocket clip for easy carry. There is an optional high brightness LED (.075 watts) for protecting night vision with a 24 hour burn time. All this, and it's waterproof up to 500 feet!
Pages 1 2 3 4
|